How To Measure For Screens

Our screens and covers are made to order for each window, so accurate measurements are critical for your satisfaction.

Our standard screens and covers are made with a 2″ (5cm) wide fabric perimeter frame, and our fasteners are placed in the center of that fabric perimeter.

The opening size that you submit should be the inner measurements that will allow the fasteners to be installed 1″ (2.5cm) outside your opening.

In the diagram, the red section is the opening that you’ll be covering, and the green section is the fabric perimeter. The fasteners will be installed in the middle of the green section all the way around the perimeter.

Bill Ritter, Shipwreck Point Lighthouse

OutFront screens were put on my porch in Naufrage after standard screens were blown out during a windy day which there are many of them up there. I’ve had absolutely no problems with them. What’s really nice about them is the ease of taking them down and putting them back up. I was one of the early customers for this product and would recommend them to anyone.

Comments are closed.